SC-F7100 Series/SC-F7000 Series
W
Align the white lines of the plates with the white
lines of the platen and push the plates down to
lock them in place and keep them from lifting.
c
Important:
❏ Do not use the media holding plates
with media that is more than 0.4 mm
thick. The media holding plates could
touch and damage the print head.
❏ Move the media holding plates to the
left and right edges of the platen when
they are not in use.
❏ Do not use the media holding plates if
the sides of the printed media are
smudged or torn.
X
Close the front cover.
User's Guide
Basic Operations
After loading the media, proceed to Viewing and
Changing Media Settings.
U
page 39
Loading Media (SC-F7000 Series)
This section describes the methods to load media.
!
A
B
C
33
"Viewing and Changing Media Settings" on
Caution:
Because the media is heavy, it should not be carried
by one person. When loading or removing the
media, use at least two persons.
Remove the media holding plates, if installed.
Turn on the printer by pressing the P button.
Loosen the roll holder fixing screws sufficiently
and adjust the roll holders so that the distance
between the two is wider than the media.
Center the roll supports between the roll holders.