Epson SC-F7100 series User Manual page 31

SC-F7100 Series/SC-F7000 Series
Note:
Media that is heavy and difficult to unroll can be
fed by pressing the drive switch on the left roll
holder.
Printable Side Out
Printable Side In
N
Insert the media past the pressure rollers and
lower the media loading lever to hold it in place.
Confirm that the left edge of the media passes
over the center of the square in the label on the
loading guide.
c
Important:
Perform Steps 14 to 4 in reverse order and
repeat the loading process if the left edge of
the media is not within the guides. Do not
attempt to reposition the roll holders while
they are inserted in the media.
User's Guide
Basic Operations
O
P
Q
R
31
Go to the front of the printer and open the front
cover.
Hold the center of the media and raise the media
loading lever.
Pull the media straight forward to the leading
edge of the after heater.
Close the front cover.