Epson SC-F7100 series User Manual page 126

SC-F7100 Series/SC-F7000 Series
G
After film a stops swinging, record the value of
the scale on the front side of the white line of the
platen.
H
At the front and rear of the printer, raise film a
and move it so that it aligns with film b tightly.
After film a stops swinging, check the scale where
the front side of the white line of the platen
passes.
If the value is different from the left side, proceed
to Step 9. If the value is the same, proceed to Step
10.
User's Guide
Appendix
I
J
126
While checking the scale of film a on the front
side of the printer, use the large hexagon wrench
for adjustment.
If the adjustment screw is turned clockwise, the
scale moves back. If the adjustment screw is
turned counterclockwise, the scale moves
towards you. One turn of the screw moves the
line about 1 mm.
Use the large hexagon wrench to firmly secure
the 4 screws.