Rfid Module For Mf Model; Serial Port (Com) Settings; Table 2-15: Rfid Module Specifications For Em Models; Table 2-16: Rfid Module Specifications For Mf Models - IEI Technology AFL2-W15A-N270/L325 User Manual

AFL2-W15A-N270/L325 Panel PC
Frequency
Interface
Resolution
Transponders Supported
Dimensions

Table 2-15: RFID Module Specifications for EM Models

2.11.2 RFID Module for MF Model

lists
Table 2-15
AFL2-W15A-N270/L325 MF models.
Model
Power Requirements
Frequency
Interface
Card Type
Reading Distance
Resolution
Transponders Supported
Dimensions

Table 2-16: RFID Module Specifications for MF Models

2.11.3 Serial Port (COM) Settings

The COM port settings have to be set correctly to enable the communication with the
built-in RFID reader. Please follow the information below to setup the COM port settings.
Launch the Hyper Terminal from the Start menu (Start
Step 1:
Accessories
125 KHz, ASK
Wiegand 26 bits, ABA Track2, Serial TTL
9600bps, 8N1
> 8cm
Read only
L90.00x W22.5xH24.00 mm with cover
the specifications of
MF222
5VDC+/-5% at 100 mA
13.56 MHz
Wiegand 26 bits, ABA Track2, RS-232, Serial TTL
9600bps, 8N1
Mifare MF1 standard cards for 1024/4096 bytes
and Mifare UltraLight cards of EEPROM
size 512 bits for ISO14443A
2~5 cm
> 8cm
Read only (for unique serial number/unique
identifier)
L90.00x W22.5xH24.00 mm with cover
Communications HyperTerminal).
the RFID module installed
Programs
in the
Page 49