Panel Mounting; Figure 2-17: Arm Mounting (Arm-11-Rs) - IEI Technology AFL2-W15A-N270/L325 User Manual

Figure 2-17: Arm Mounting (ARM-11-RS)

2.8.2 Panel Mounting

To mount the panel PC into a panel, please follow the steps below.
Select the position on the panel to mount the flat panel PC.
Step 1:
Cut out a section corresponding to the size shown below. The size must be
Step 2:
smaller then the outer edge. Recommended cutout sizes are shown below.
Page 38
AFL2-W15A-N270/L325 Panel PC