Origotig 150 - ESAB Caddyt Arc 150i Service Manual

OrigoTig 150

OPERATION
General safety regulations for the handling of the equipment can be found on
page 52. Read through before you start using the equipment!
Connections and control devices
1. Mains switch
2. Connection for gas from gas bottle
3. Mains cable
4. Connection for the TIG torch switch
5. Connection for gas to the TIG torch
6. TIG torch connection (--)
7. MMA: return cable connection (--)
8. TIG: return cable connection (+)
MMA: welding cable connection (+)
9. Control panel
Control panel
The control panel comprises a display, setting knob, LEDs and pushbuttons. Using the
pushbuttons, it is possible to move between the various functions. The selected function is
indicated by the relevant LED lighting up.
1. Indicating lamp, mains
power supply On.
2. Display.
3. Indicating lamp, overheating.
4. Knob for setting data.
5. Selection of TIG
welding mode.
6. Selection of TIG HF start
LiftArc start .
7. Selection of TIG 2--stroke
8. Slope--down time.
9. Gas post--flow time.
Overheating protection
The welding power source has a thermal overload trip which operates if the temperature
becomes too high, interrupting the welding current and lighting a yellow indicating lamp on
the front of the power source. The thermal overload trip resets automatically when the
temperature has fallen.
ct27ie1
or MMA
or TIG
or TIG 4--stroke control mode.
- - 62 - -
OrigoTig 150
S0740 800 161/E061205/P66