4000 Series Vandal Resistant Range
Art. 4212V - 4212RV
PROGRAMMING PARAMETERS
USER PARAMETERS
User par. menu
Parameter Name
1: Usr
User name
2: Flat
Flat
3: Code
Code
4: Fl.
Floor
5: En.
Enable
6: Ph. Id
Phone Id
7: Bl. Id
Block Id
8:Tag
Tag
USER NAME
The user name can be up to 16 characters long and is displayed during searching and calling.
Modify routine
• select user searching by name or flat;
• press "1" button to enter into edit mode;
• type name;
• press
to save or
to delete characters or exit edit mode without save.
FLAT
The flat number is entered by the visitor to call a flat. It can be 1 to 6 digits long.
Modify routine
• select user searching by name or flat;
• press "2" button to enter into edit mode;
• type flat number;
• press
to save or
to delete characters or exit edit mode without save.
CODE
Access Code is entered by the user to open the door.
Modify routine depends on Mode setting: in COMPATIBILITY MODE only one code is possible per user. Pressing "3" will allow the
code to be edited.
In NORMAL MODE multiple codes can be assigned to a user. This routine is described in "Code management" on pag. 5
In both cases codes can be from 3 to 6 digits using keys 0 - 9. It can be disabled by leaving it blank.
Modify routine (only for COMPATIBILITY MODE)
• select user searching by name or flat;
• press "3" to enter into edit mode;
• type new access code;
• press
to save or
to delete characters or exit edit mode without saving.
Art. 4212V-4212RV - Installation instructions
Audio/video digital front panel
Programming Method
By panel and PC software
By panel and PC software
By panel and PC software
By panel and PC software
By panel and PC software
By panel and PC software
By panel and PC software
By panel and PC software
Programming
7
Permission
Default value
All
"
All
/
All
/
All
/
All
Enabled
Only Engineer
/
Only Engineer
/
All
/
66250203-EN - V0.3 - 10/07/15
"