Programming The Gsm Intercom - Videx GSM Lite 4000 Series Technical Manual

4000 Series GSM Lite Audio Intercom

Programming the GSM Intercom

PROGRAMMING THE GSM INTERCOM
Programming the GSM LITE intercom can be carried out by sending text (SMS) messages to the module.
IMPORTANT NOTE: When you are required to use " in a text message it is very important to use the correct symbol and not for
example ' (or two ' single apostrophes side by side which you will see look the same but will be interpreted differently by the
GSM LITE intercom panel).
PROGRAMMING BY TEXT MESSAGE
Programming by text message is a simple way to customise the settings of the GSM LITE intercom panel and add or delete telephone
numbers. Simply send texts in the following format shown below to the telephone number of the SIM within the GSM LITE intercom
panel:
<4 DIGIT CODE> <3 DIGIT FUNCTION CODE> <OPTIONAL DATA> <OPTIONAL ?>
4 DIGIT CODE
3 DIGIT FUNCTION CODE
DESCRIPTION
Store a primary telephone no.
Store divert telephone no.
Store a primary telephone no.
and divert no in a single text
message
Store a dial to open no. (DTO)
or
Store up to 5 dial to open no's
(DTO) in a single text message to
the next available locations
Delete a dial to open no. without
knowing it's location
Set call time
Set relay time
Set auxiliary AO1 output time
Set auxiliary AO1 out mode
Keep connection facility
Divert to next no. time
Check GSM signal strength
Check software version
Dial a number
Store SMS message for g-4
Change 4 digit code
Trigger the relay
Trigger the auxiliary output AO1 A1O
Store balance check dial string
Check credit balance
Store master telephone no.
Latch the relay
Unlatch the relay
Latch the auxiliary AO1 output
Unlatch the auxiliary AO1 output A1U
Input status check and set
Silent dialling mode
4000 Series GSM Lite Audio Intercom - Technical Manual
This code prevents unauthorised access to the programmable features of the system. The code must
be four digits long but can be any combination using digits 0 – 9. The default code is 1111 and will
be used for all examples in this manual.
The 3 digit function code identifies the programmable feature to be changed. The code must be in
capital letters. The following table lists the available codes.
CODE EXAMPLE
STN 1111STNnnn"01912243174"
STD 1111STDnnn"01912241559"
STN 1111STNnnn"pn", " dn"
1111STNnnn"01912243174",
"01912241559"
STR 1111STRnnn"07771234567"
1111STR"n1", " n2", " n3", " n4", " n5"
1111STR"01912243174",
"01912241559", " 01912243678",
"01912245326", " 07897123456"
DET 1111DET"01912243174"
SPT 1111SPTnn
RLT 1111RLTnn
A1T 1111A1Tnn
A1M 1111A1Mnn
NOD 1111NODnn
DIT 1111DITnn
SIG 1111SIG?
VER 1111VER?
DLE 1111DLE"123"
SMS 1111SMS"HouseAlarm"
CDE 1111CDE1234
RLY 1111RLY
1111A1O
SDL 1111SDL"*#1345#"
BAL 1111BAL?
STM 1111STM"07771234567"
RLA 1111RLA
RUL 1111RUL
A1L 1111A1L
1111A1U
CHK 1111CHK?
AUE 1111AUEnn
SETTINGS
nnn = 001 - 004
nnn = 001 - 004
nnn = 001 - 004
pn = primary no.
dn = divert no.
nnn = 000 - 099 or
nnn = optional
n1 = 1st DTO
n2 = 2nd DTO
n3 = 3rd DTO
n4 = 4th DTO
n5 = 5th DTO
n/a
nn = 01 - 12
nn = 00 - 99
nn = 00 - 99
nn = 00 - 05
nn = 01 - 99
nn = 01 - 99
n/a
n/a
n/a
n/a
Any 4 digits
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
nn = 00 or 01
- 29 -
DEFAULT PAGE
n/a 30
n/a 30
n/a 30 - 31
n/a 31 - 32
n/a 33
02 (40s) 33
05 (5s) 33
05 (5s) 33
01 33 - 34
0 (disabled) 34
15 (15s) 34
n/a 34
n/a 34
n/a 34 - 35
AUX TRIG 35
1111 35
n/a 35
n/a 35
n/a 35
n/a 35 - 36
n/a 36
n/a 36
n/a 36
n/a 36
n/a 36
n/a 36 - 37
01 37
66250756-EN - V2.1 - 05/11/19