Table of Contents
Advertisement
Installing the 2104 Model DS4 into the rack
CAUTION:
This unit weighs over 32 Kg (70.5 lbs). Refer to manuals. (4)
Figure 25. 2104 Model DS4 weight label
CAUTION:
If a 2104 Model DS4 is fully loaded with 14 drives and two power supplies, its
total weight exceeds 32 Kg (70.5 lbs). You must remove at least six drives from
the 2104 Model DS4 before you lift it or install it into a rack or 2104 Model TS4.
This reduces the total weight to less than 32 Kg (70.5 lbs) and the
DS4
injury.
Attention:
If you have data stored on the drives, label the drives before you remove
them. When you replace the drives, install each one in the same drive bay
from which you removed it. Failure to do so could result in a loss of data.
CAUTION:
Do not use the handles of the fan or fan-and-power-supply assemblies to
carry the 2104 Model DS4. These handles are not intended to support the
weight of the unit. (16)
Refer to manuals
32 Kg (70.5 lbs)
SC000220
can then be safely handled by two people. Failure to do so can result in
> 18 Kg (37 lbs)
> 32 Kg (70.5 lbs)
2104 Model
SC000334
Installing a 2104 Model DS4
11
Advertisement
Table of Contents
