Table of Contents
Advertisement
Setting the options
Perform the following steps to set the options on the 2104 Model DS4:
Figure 33. Setting the box ID
1. Refer to your 2104 Model DS4 configuration information for details to set the
options.
2. Use a small screwdriver to rotate the Box ID rotary switch (see Figure 33) to
the ID you have chosen for this 2104 Model DS4 disk enclosure.
3. Find the sheet of labels supplied with your 2104 Model DS4. These are
numbered 0 through 9. Select the one that represents your setting of the Box
ID rotary switch. Attach it to the front of the 2104 Model DS4.
Note: When running the Linux operating system, you can set the Box ID
switch and attach the Box ID label. Your Linux operating system might
or might not display the Box ID in its system messages.
Note: The Box ID is used when running the standalone AIX Diagnostics CD.
SC000015
Installing a 2104 Model DS4
19
Advertisement
Table of Contents
