Fujitsu PRIMEQUEST 2000 Series Message Reference page 118

MMB Messages
14061
Device error (SCSI command retry out)
Meaning:
A SCSI command terminated abnormally (retry out).
Corrective action:
Identify the type of the target unit. Then, check the sense key (extended sense) in the original message to
determine the corrective action.
1 (Recovered Error): If it is a removable device, perform cleaning.
2 (Not Ready): If it is non-removable, replace the device.
3 (Medium Error): If it is a disk, replace the device. If it has removable media, perform cleaning and replace
the media.
4 (Hard Error): Replace the device.
5 (Illegal Request): Examine the software.
6 (Unit Attention): This is notification information from various devices. (e.g., reset status, degradation)
7 (Data Protect): Check the Write Protect status.
8 (Blank Check): Check tape and other operations.
9 (Aborted Command): Investigate problems in the SCSI bus and Fibre Channel transmission paths.
Severity:
Warning
14067
Software error (Device configuration error)
Meaning:
An error occurred in the device configuration. Although settings permit response to an X-byte INQUIRY, an
INQUIRY command of X bytes failed.
Corrective action:
The information set using echo "vendor:model:flag" > /proc/scsi/device_info may be incompatible with the
hardware. Confirm the settings.
If the settings are correct, a SCSI device failure may have occurred.
Severity:
Warning
14068
Device error (inquiry failed)
Meaning:
A device error occurred.
Corrective action:
Replace or remove the device.
Severity:
Warning
14070
Device error (Device configuration error)
Meaning:
The number of LUNs reported by the device exceeds the supported limit of the operating system.
Corrective action:
Set a larger value in max_scsi_report_luns, or reduce the number of LUNs on the device side.
Severity:
Warning
14071
Device error (Device configuration error)
Meaning:
An error occurred in the device configuration. The number of LUNs reported by the device exceeds the
supported limit of the operating system.
Corrective action:
Reduce the number of LUNs on the device side.
Severity:
Warning
103
CA92344-0540-06