Fujitsu PRIMEQUEST 2000 Series Message Reference page 104

MMB Messages
12556
Adapter error (Hardware Initialization Failed)
Meaning:
Hardware is not initialized or not working correctly.
Corrective action:
Replace the HBA
Severity:
Warning
12557
Adapter error (OSM Hardware Initialization Failure)
Meaning:
Hardware is not initialized or not working correctly. It might be a firmware problem.
Corrective action:
Replace the HBA
Severity:
Warning
12558
Adapter error (Unrecoverable Error)
Meaning:
Hardware error or exception which is not handled on Hardware and Firmware has occurred.
Corrective action:
Replace the HBA
Severity:
Warning
12559
Adapter error (Connection to the target was lost)
Meaning:
The connection to the target device is lost.
Corrective action:
Check the connection path (cable, switch, HBA, disk device port, etc...). If the error keeps recurring, contact
your sales representative or a field engineer.
Severity:
Warning
■SCSI (Linux) related
13007
Adapter error (Not initialize properly)
Meaning:
Adapter initialization failed during adapter installation.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13008
Adapter error (pci-suspend: IOC msg unit reset failed)
Meaning:
The IOC message unit reset process failed.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
89
CA92344-0540-06