Fujitsu PRIMEQUEST 2000 Series Message Reference page 223

Dynamic Reconfiguration Messages
dr-util:ERR:424: Failed to eject SB<x> with error <y>.
Meaning:
Failed to remove SB<x> with error number <y>.
Corrective action:
The remove of SB<x> failed because of the error <y>.
Please try removing of SB again. When the improvement is not seen even if it executes it again, please
gather the information for investigation by using "/opt/FJSVdr-util/sbin/dr report" on the partition side, and
contact the technology of our company member
dr-util:ERR:425: Exited <x> with status <y> at <z> timing.
Meaning:
Collaboration program<x> exited with status <y> at <z> timing. <z> represents "before" or "after"
Corrective action:
SB hot-remove was aborted because of the failure of collaboration program<x>.
Please review the output messages of collaboration program<x>
dr-util:ERR:426: Failed to remove SB<x>.
Meaning:
The remove of SB<x> terminated abnormally.
Corrective action:
The remove of SB<x> aborted.
Please confirm the error messages and do corrective action according to error.
Please try removing of SB again. When the improvement is not seen even if it executes it again, please
gather the information for investigation by using "/opt/FJSVdr-util/sbin/dr report" on the partition side, and
contact the technology of our company member
dr-util:WARNING:428: Some CPUs and/or MEMs are busy, will retry Remove
Meaning:
It takes time to the disabling process of CPU and memory during SB hot-remove.It may be displayed during
SB hot-remove.
Corrective action:
No action is necessary.
dr-util:ERR:440: Failed to add IOU<x> with error <y>.
Meaning:
Failed to add IOU<x> with error number <y>.
Corrective action:
The addition of IOU<x> failed because of the error <y>.
Please try adding of IOU again. When the improvement is not seen even if it executes it again, please gather
the information for investigation by using "/opt/FJSVdr-util/sbin/dr report" on the partition side, and contact
the technology of our company member
dr-util:ERR:441: Exited <x> with status <y> at <z> timing.
Meaning:
Collaboration program<x> exited with status <y> at <z> timing. <z> represents "before" or "after"
Corrective action:
IOU hot-add was aborted because of the failure of collaboration program<x>.
Please review the output messages of collaboration program<x>
dr-util:ERR:450: Failed to remove IOU<x> with error <y>.
Meaning:
Failed to remove IOU<x> with error number <y>.
Corrective action:
The remove of IOU<x> failed because of the error <y>.
Please try removing of IOU again. When the improvement is not seen even if it executes it again, please
gather the information for investigation by using "/opt/FJSVdr-util/sbin/dr report" on the partition side, and
contact the technology of our company member
dr-util:ERR:451: Exited <x> with status <y> at <z> timing.
Meaning:
Collaboration program<x> exited with status <y> at <z> timing. <z> represents "before" or "after"
Corrective action:
IOU hot-remove was aborted because of the failure of collaboration program<x>.
Please review the output messages of collaboration program<x>
CA92344-0540-06
208