Fujitsu PRIMEQUEST 2000 Series Message Reference page 28

MMB Messages
1507020E
Configuration Data error MMB
Meaning:
The configuration data may be corrupted.
Corrective action:
An MMB must be replaced. If the problem persists, another MMB must be replaced.
Severity:
Error
Remarks
This error is basically from the Standby side.
15070261
HUB failure
Meaning:
The HUB may be damaged.
Corrective action:
An MMB must be replaced. Contact your sales representative or a field engineer.
Severity:
Error
15070271
Uncorrectable error
Meaning:
Uncorrectable error has occurred.
Corrective action:
An MMB must be replaced. Contact your sales representative or a field engineer.
Severity:
Error
15070289
Diag: HUBSPI Timeout
Meaning:
The HUB SPI (serial interface) has timed out.
Corrective action:
An MMB must be replaced. Contact your sales representative or a field engineer.
Severity:
Error
1507028A
Diag: OnChip IIC I2CARD Error
Meaning:
A register error was detected.
Corrective action:
An MMB must be replaced. Contact your sales representative or a field engineer.
Severity:
Error
1507028B
Diag: NIC Loopback Error
Meaning:
A loop-back error was detected.
Corrective action:
An MMB must be replaced. Contact your sales representative or a field engineer.
Severity:
Error
1507028C
Diag: IIC I2CADR Error
Meaning:
The PCA9564 IIC register could not be correctly set. Control bus error was detected.
Corrective action:
An MMB must be replaced. Contact your sales representative or a field engineer.
Severity:
Error
CA92344-0540-06
13