Reducing The Transportation Size - Recaro; Preparing For Transport; Use In A Wheelchair Accessible Vehicle; Safety Instructions - Otto Bock B500 Instructions For Use Manual

Operation
Fig. 39 Removing the cross bolt
1 Cross bolt
6.13.3 Reducing the transportation size – Recaro® seat
To remove/install the Recaro® seat on the mobility base
and to fold the backrest down: see Page 48.

6.13.4 Preparing for transport

1) Position the power wheelchair in its transport location.
2) Turn the control unit off.
Page 62
2 Lever
3) Engage the brake.
4) Use the eyebolts and cargo straps to attach the power
wheelchair to the means of transportation.
Fig. 40 Front (left) and rear (right) eyebolts

6.14 Use in a wheelchair accessible vehicle

6.14.1 Safety Instructions

WARNING
Use as a seat in a wheelchair accessible vehicle
Risk of falling out of the power wheelchair, severe injury in
case of accident
03/2011 B500 online/e-europe