Stackable NWay Ethernet Switch User's Guide
You will need to change some settings to allow you to be able
to
manage
the
Switch
from
an
SNMP-based
Network
Management System such as SNMP v1 or to be able to access
the Switch using the Telnet protocol. See the next chapter for
Web-based network management information.
Configure IP Address
The Switch needs to have a TCP/IP address assigned to it so
that an in-band network management system or Telnet client
can find it on the network. The IP Address Configuration
screen allows you to change the settings for the two different
interfaces used on the Switch: the Ethernet interface used for
in-band communication, and the SLIP interface used over the
console port for out-of-band communication.
Choose Configure IP Address to access the first item on the
System Configuration menu. The following screen appears:
Figure 6-8. IP Address Configuration screen
Using the Console Interface
65