Stackable NWay Ethernet Switch User's Guide
Then, use the screws provided with the equipment rack to
mount the Switch in the rack.
Figure 2-2B. Installing the Switch in an equipment rack
Power on
The Switch can be used with AC power sources 100 - 240 VAC,
50 - 60 Hz. The power switch is located at the rear of the unit
adjacent to the AC power connector and the system fan. The
Switch's power supply will adjust to the local power source
automatically and may be turned on without having any or all
LAN segment cables connected.
After the power switch is turned on, the LED indicators should
respond as follows:
Unpacking and Setup
11