Port Traffic Statistics
To access the second item on the Traffic Statistics menu,
choose Port Traffic Statistics. The following table appears:
Figure 6-45. Port Traffic Statistics screen
Select the desired device in the Switch field, the desired setting
in the Ports field, and the desired increment setting in the
Update Interval field: 5 sec, 15 sec, 30 sec, 1 min, or Suspend.
The statistic counters displayed are defined as follows:
♦ Speed If the link is up, the speed and duplex status will be
displayed; if the link is down "-" will be displayed.
♦ % Utilization
bandwidth each port is using over the amount of time
specified by the update interval. For example, when a 10
Mbps port is relaying packets at 5 Mbps, the utilization is
50%.
Using the Console Interface
Stackable NWay Ethernet Switch User's Guide
This shows the percentage of available
119