Stackable NWay Ethernet Switch User's Guide
100BASE-FX front-panel module. The anchor port for the first
group is preset as port 5, the anchor port for the second group
is port 13 and the anchor port for the third group is the first
port (1x) on the 2-port module.
Figure 5-3. Port trunking example
The switch treats all ports in a trunk group as a single port. As
such, trunk ports will not be blocked by Spanning Tree (unless
a redundant link with higher STP priority is present).
Data transmitted to a specific host (destination address) will
always be transmitted over the same port in a trunk group.
This allows packets in a data stream to arrive in the same
order they were sent. A trunk connection can be made with
any other switch that maintains host-to-host data streams over
Switch Management Concepts
43