Stackable NWay Ethernet Switch User's Guide
Configure MAC-based Broadcast Domains
To create MAC-based broadcast domains, simply create the
broadcast domain itself in the Add/Remove MAC-based
Broadcast Domains screen, and then enter MAC addresses to
the broadcast domain in the Add/Remove MAC-based
Broadcast Domain Members screen. Afterwards, restart the
Switch and the broadcast domain will be implemented.
Please note that if the mode is set to MAC-Based Broadcast
Domains, then the Port Lock function is not supported in the
Port Configuration screen and the Lock Address Table
function located on the Configure Filtering and Forwarding
table screen is not available.
Choose Configure MAC-base Broadcast Domains from the
bottom of the screen above to access the MAC-Based
Broadcast Domains Configuration menu:
Figure 6-28. MAC-Based Broadcast Domains Configuration
menu
Using the Console Interface
97