Figure 6-23. Igmp Configuration Screen - D-Link DES-3624 Series User Manual

Basically, in these submenus you define whether the Switch
can intelligently forward IGMP packets, and you must also
define which 802.1Q VLANs (if present) can send and receive
IGMP and Multicast packets.
To access the IGMP Configuration screen, select Configure
Filtering and
Configuration menu. Then select Configure IGMP from the
bottom of the Configure Filtering and Forwarding table
screen. The following screen appears:

Figure 6-23. IGMP Configuration screen

Items in the above window are defined as follows:
♦ IP Multicast Filtering Age-out Timer (30-9999)
this timer expires and the switch has not observed
(snooped) any IGMP query packets asking whether any
stations belong to any Multicast groups, the switch itself
Using the Console Interface
Stackable NWay Ethernet Switch User's Guide
Forwarding Table from the System
When
91