Switch; Figure 7-2. Configure Switch Stack Window - D-Link DES-3624 Series User Manual

Stackable NWay Ethernet Switch User's Guide
enabled, when the Switch is first powered up it will
look for a BOOTP server to provide it with this
information before using the supplied settings.
♦ IP Address
TCP/IP network.
♦ Subnet Mask
subnetting on your TCP/IP network.
♦ Default Gateway The IP address of the device, usually
a router, that handles connections to other subnets
and/or other TCP/IP networks.

Switch

Figure 7-2. Configure Switch Stack window

To set basic Switch settings, enter a System Name in the first
field, the physical location of the Switch in the System
Web-Based Network Management
The host address for the device on the
The subnet mask that controls
135