Oce CS655 Pro Administrator's Manual page 59

Adjustment
7
Touch the required size key.
8
Touch [+ <--> -] to specify the value to be positive or negative. Use the touch panel keypad to enter the
desired adjustment value, then touch [<<SET].
Available range: -128 (left) to +127 (right), 1 step = 0.1 mm
– If specified value is positive, the folding positions move to the right. Or, if negative value is specified,
the folding positions move to the left.
9
Repeat steps 3 to 8 until the desired result is obtained.
10
If adjustment in any other size is required, repeat steps 3 to 9.
11
Touch [Return] to restore the Adjustment Menu Screen.
CS655 Pro
3
3-31