Table of Contents
Advertisement
8
HDD data setting file:
-
Begin the file name with #IP_HDD.
-
A line should include NAME, NUMBER, REFERENCE, or DAILY, separated by a tab.
-
NAME should be 24 bytes or less.
-
Use up to 9 digits numbers (0 - 9) only to specify a NUMBER.
-
REFERENCE should be 24 bytes or less.
-
Mark DAILY USE with "1" or DAILY NOT USE with "0" in each column.
FTP data setting file:
-
Begin the file name with #IP_FTP.
-
A line should include NAME, ADDRESS, PORT, FILEPATH, LOGINNAME, PASSWORD, REFERENCE,
or DAILY being separated by a tab.
-
NAME should be 24 bytes or less.
-
ADDRESS should be 63 bytes or less.
-
Use up to 5 digits numbers (0 - 9) only to specify PORT (1 – 65,535).
-
FILEPATH should be 96 bytes or less.
-
LOGINNAME should be 47 bytes or less.
-
PASSWORD should be 24 bytes or less.
-
REFERENCE should be 24 bytes or less.
-
Mark DAILY USE with "1" or DAILY NOT USE with "0" in each column.
SMB data setting file:
-
Begin the file name with #IP_SMB.
-
A line should include NAME, ADDRESS, FILEPATH, LOGINNAME, PASSWORD, REFERENCE, or
DAILY being separated by a tab.
-
NAME should be 24 bytes or less.
-
ADDRESS should be 63 bytes or less.
-
FILEPATH should be 96 bytes or less.
-
LOGINNAME should be 47 bytes or less.
-
PASSWORD should be 14 bytes or less.
-
REFERENCE should be 24 bytes or less.
-
Mark DAILY USE with "1" or DAILY NOT USE with "0" in each column.
8-28
Web utilities setting
CS655 Pro
Advertisement
Table of Contents
