Table of Contents
Advertisement
Web utilities setting
Note
The file cannot be accessed when the machine is operating. If an error message is displayed, try again
to save the file after the current machine operation is completed.
Note
If the registration cannot be completed successfully, error messages will be displayed as follows.
"Can't transfer data (The machine is busy)"
Try again to import the data after the machine operation in progress is completed.
"The data cannot be recognized"
Confirm that the data is the machine setting file.
"Data size is too large"
Confirm that the data is the machine setting file.
Check if the file size exceeds 100,000 bytes.
"The data cannot be registered"
Check if inappropriate description is made in the machine setting file. Check if the file entries are already
over the limit.
To Edit the Machine Setting File
-
Save the file as a text.
-
Begin the file with a specified tag. (ex. #EKC_TAB)
-
A line should be 300 bytes or less.
-
The file size should be 100,000 bytes or less.
-
The line that begins with "#" is a comment.
ex. Machine setting file of an account track data
Specifications for each machine setting file type
Account track data setting file:
-
Begin the file with #EKC_TAB.
-
Max. 1,000 files can be edited.
-
A line should include PASSWORD, NAME, and LIMIT, separated by a tab.
-
Use up to 8 digits numbers (0 - 9) and alphabets only to specify PASSWORD.
-
Use numbers and alphabets only to specify NAME.
-
Use up to 8 digits numbers (0 - 9) only to specify LIMIT (0 – 99,999,999).
E-mail data setting file:
-
Begin the file with #IP_EMAIL.
-
A line should include NAME, ADDRESS, REFERENCE, and DAILY, separated by a tab.
-
NAME should be 24 bytes or less.
-
ADDRESS should be 250 bytes or less.
-
REFERENCE should be 250 bytes or less.
-
Mark DAILY USE with "1" or DAILY NOT USE with "0" in each column.
CS655 Pro
8
8-27
Advertisement
Table of Contents
