Table of Contents
Advertisement
3
6
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Fold & Staple Stopper Adjustment Screen will be restored.
7
Display the required size key using up/down arrow keys, and touch it.
8
Touch [+ <--> -] to specify the value to be positive or negative. Use the touch panel keypad to enter the
desired adjustment value, then touch [<<SET].
Available range: -128 (wide) to +127 (narrow), 1 step = 1 mm
9
Repeat the adjustment steps from 3 to 8 until the desired result is obtained.
10
If adjustment in any other paper size is required, repeat steps from 3 to 9.
11
Touch [Return] to restore the Adjustment Menu Screen.
3-20
Adjustment
CS655 Pro
Advertisement
Table of Contents
