Table of Contents
Advertisement
Adjustment
3.4.5
03 Punch Adjustment \ 03 Registration Adjustment (FS-520/FS-607)
Perform this adjustment for the skew of the punch position made by the Punch Kit PK-512/PK-513 in duplex
copying or cover sheet feeding using the paper inserter.
1
Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2
Touch [04 Finisher Adjustment], [03 Punch Adjustment], and then [03 Registration Adjustment].
The Registration Adjustment Screen is displayed.
3
Select the desired tray.
4
Touch [COPY] tab.
The Copy Screen will be displayed.
5
Load the desired size of paper on the tray to be adjusted, specify Punch, then press [Start] on the
control panel.
A sample pattern will be output.
6
Check whether or not the punch position is skew on the output sheet.
7
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Registration Adjustment Screen will be restored.
CS655 Pro
3
3-27
Advertisement
Table of Contents
