Table of Contents
Advertisement
6
6.8
07 Copy Setting
The following features can be provided by switching the setting.
Note
This setting is equivalent to the setting specified in [04 Copy Setting] in the User Setting.
Feature
Fold & Staple auto select
Fine Adjust Margin
Orig. Glass Auto Size Select
Auto Detect Orig. Size in ADF
Original Glass AMS
ADF AMS
Non-Image Area Erase of orig
ADF Frame Erase
Rotation
Suspend Interruption
Change Page Print Pos (Book-
let)
Printer Prohibit Timer
Bookmark function
Orig./Out Bind Direction Set
Choose Default Tray when
APS Off
Scan prohibit (pull out tray)
6-86
Description
Set the machine to automatically select the Booklet
mode when Stapling & Folding mode is selected.
Select On/Off to enter a decimal point for image shift.
Set the machine to automatically select the same
size of copy paper as the original placed on the orig-
inal glass.
Set the machine to automatically select the same
size of copy paper as the original placed on the ADF.
Set the machine to detect the size of the original and
select the appropriate magnification ratio to corre-
spond to the selected paper size.
Set the machine to automatically select an appropri-
ate ratio for copying when detecting the original size
placed on the ADF.
Specify the conditions to be applied to [Non-Image
Area Erase of orig].
Set to erase the frame when copying in ADF mode.
When the trays contain only the paper size different
from the original, rotate the image of the original and
adjust to fit into the copying paper size.
Set the timing to interrupt the present job when
pressing [Interrupt] while copying.
Set the page number position when using Booklet
with Page Numbering in Stamp.
Select the interval time that printing via PC is prohib-
ited after touching the touch keys.
Specify whether to delete the set bookmark or not, or
select to disable the bookmark function.
Set the machine to conform the binding direction of
the originals and printed sets each other.
Select the tray to be automatically selected when
APS is released.
Set to stop scanning when pulling out the tray.
Machine administrator setting
Available options
Yes/No
Yes/No
On/Off
On/Off
On/Off
On/Off
Yes/ APS/AMS /Except
Orig. Glass (1:1)
None/1mm/2mm/3mm/
4mm/5mm
On-Always /APS/AMS
/APS/AMS /Reduce
Stop Immediately/When
Current Comp.
Off/On (Outside Print)
Off/15 seconds/30 sec-
onds/60 seconds/90 sec-
onds
Off/Release Every Job/Not
release
On/Off
APS Tray/ Tray1/ Tray2/
Tray3/ Bypass Tray/ Tray4
On/Off
CS655 Pro
Advertisement
Table of Contents
