Out Mode Menu; Transfer Function - Barco MDSC-8258 User Manual

Table of Contents

Advertisement

5. Advanced operation
To enable the out power
1. Bring up the OSD main menu.
2. Navigate to the Input Channel menu.
3. Enter the Input Channel menu.
4. Navigate to the Out Power submenu.
5. Enter the Out Power submenu.
6. Enable or disable the Out power as desired and confirm.
5.3

Out Mode menu

Overview

Transfer function

5.3.1
Transfer function
About transfer function
There are different transfer function possibilities:
Native: the transfer function is transparent (no correction is applied).
DICOM (Factory): The output curve follows the DICOM curve and an offset can be applied to the curve
(see "User setting (DICOM)", page 23).
DICOM (User): The output curve follows the DICOM curve and an offset can be applied to the curve
(see "User setting (DICOM)", page 23).
The user curves are pre-setted in the factory or downloaded from User.
COLOR (Factory): The monitor output is corrected according to the color temperature pre-setted in
the factory. This setting can be set from 2000°K to 12000°K in steps of 100°K) (see "User setting
(COLOR)", page 23).
COLOR (User): The monitor output is corrected according to the color temperature selected by the
user. This setting can be set from 2000°K to 12000°K in steps of 100°K) (see "User setting (COLOR)",
page 23).
Monitor calibration is pre-setted in the factory but can be downloaded from User.
User LUT: The monitor output is corrected according to a predefined user LUT.
The user curves are pre-setted in the factory or downloaded from User.
RGB Set (User): The monitor output is corrected according to the Red, Green and Blue color values
adjusted by the end user (from 0 to 1785 in steps of 1) (see "User setting (RGB SET)", page 24).
In this menu, COLOR is replaced with the current color temperature (e.g. 6500°K (FAC-
TORY))
To change the transfer function
1. Bring up the OSD main menu.
2. Navigate to the Out Mode menu.
3. Enter the Out Mode submenu.
4. Select the desired setting and confirm.
22
(451920611502) K5902088 MDSC-8258 08/09/2014

Advertisement

Table of Contents
loading

Table of Contents