Table of Contents
Advertisement
3. DISPLAY INSTALLATION
3.1
Hoist bracket installation
W
ARNING
sonal only.
The two brackets are only used for transportation and installation purposes.
To mount and use the hoist bracket to the display
1. Mount the brackets to the display using the screws provided in the accessory kit. Verify that the screwing
operation is well done using a torque value of 4N/m.
2. Move your display as shown on the picture below.
(451920611502) K5902088 MDSC-8258 08/09/2014
:
Two brackets are provided in the accessory kit to be used for service per-
3. Display installation
11
Advertisement
Table of Contents
