Time-Out Lcd; Product Info - Barco MDSC-8258 User Manual

W
ARNING
To change the horizontal/vertical position:
1. Bring up the OSD main menu.
2. Navigate to the OSD Setting menu.
3. Enter the OSD Setting submenu.
4. Navigate to the TIME-OUT OSD submenu.
5. Enter the TIME-OUT OSD submenu.
6. Change the time-out of the OSD as desired with the Up/Down keys and confirm.
5.5.3

Time-out LCD

About time-out LCD
When there is no valid video signals at inputs of the display, the display will go in stand-by mode after the
time set in this menu. It is possible to choose among the following values: 10", 1' or disable. When the
time-out is set to disable, the display will not go in stand-by mode while there is no valid input. If a valid
signal is applied to the monitor, it will automatically turn on.
To change the horizontal/vertical position:
1. Bring up the OSD main menu.
2. Navigate to the OSD Setting menu.
3. Enter the OSD Setting submenu.
4. Navigate to the TIME-OUT LCD submenu.
5. Enter the TIME-OUT LCD submenu.
6. Change the time-out of the LCD as desired with the Up/Down keys and confirm.
5.6

Product info

About product info
The available information items for your display are:
• MOD: Model (commercial type identification)
• P/N: Product number
• S/N: Serial number
• H/W: Hardware release
• F/W: Firmware release
• FDL: FPGA Dual Link firmware release
To view the product info:
1. Bring up the OSD main menu.
2. Navigate to the Product info menu.
3. Enter the Product info submenu.
(451920611502) K5902088 MDSC-8258 08/09/2014
:
Image sticking is possible in case time-out disable is selected.
5. Advanced operation
25