Table of Contents
Advertisement
•
If the selected menu item is controlled by a slider use the up/down keys to adjust the item value, then
press the enter key to confirm.
•
If the selected menu item is a multiple choices menu use the up/down keys to select the desired option
then press the enter key to confirm.
•
Press the exit key to exit from the Menu page.
4.6
Enter password
To enter the password
1. If not already done so, switch on the display, see "On/Off switching", page 17.
2. Touch the Enter key.
As a result, the dialog box as shown below comes up if the OSD menu is password protected, see "Key
lock", page 26.
ENTER PASSWORD: _ _ _ _
3. Enter the password by using the four right keys of the keyboard, you can label the four keys as 1, 2, 3
and 4 (from left to right). So, if i.e. keycode is '4444', it means you have to press four time the Esc key.
1
2
If the inserted password is not correct, the following message appears on the screen.
WRONG PASSWORD!
The default password is 1-3-3-4.
The time-out of the OSD menu automatic close function can be adjusted or disabled in
the OSD menu (see "Time-out OSD", page 24).
The OSD menu position can be adjusted in the OSD menu (see "Horizontal/Vertical po-
sition", page 24).
The OSD menu can be password protected, see "Key lock", page 26.
(451920611502) K5902088 MDSC-8258 08/09/2014
3
4
4. Daily operation
19
Advertisement
Table of Contents
