Ending Calls; Setting Up And Handling Three Way Calls - Polycom VVX410 User Manual

Use the up and down arrow key to select the other previously placed calls.

ENDING CALLS

To quickly end an active call, replace the handset. Or from Lines or Calls view, press
End Call. If you're in Calls view, be sure to highlight the call first.

SETTING UP AND HANDLING THREE WAY CALLS

You can set up a three way call with two other parties.
Just as with other calls, you can hold and resume these calls. In addition, you'll have
the option to split a three way call, end the call and place the people you were talking
with on hold.
Setting up a three way call
There are two ways to set up a three way call:
the conventional way — by calling two people
and using the Confrnc soft key — or joining
two existing calls using the Join soft key.
To set up a three way call
Call the first person
From Lines or Calls view, press More and then Confrnc. The active call is held.
Using the Dialler, call the second person
When the second person answers, press More
and then Confrnc to join everyone in a
conference. The Active: Conference screen
displays, as shown next
Holding and resuming three way calls
When you place a three way call on hold, you
place the other two people in the call on hold.
No one in a held three way call can hear each
other.
Page | 12
www.scioncommunications.co.uk