Configuring The Schedules; Creating A Schedule; Schedule Page - Honeywell MAXPRO Operator's Manual

Creating a Schedule

MAXPRO NVR 3.1 Operator's Guide

Configuring the Schedules

A schedule defines the date and times when continuous recording and video analytics
(motion detection) functions are enabled for a camera.
You can create schedules for the camera to record video at recurring intervals.
To create a schedule
1. Click the Configurator tab. The System page displays by default.
2. Click the Schedule tab to navigate to the Schedule page. By default MAXPRO NVR
supports the following 4 default schedules: 24 x 7, Weekday, DayTime, and NightTime.
Figure 4-33

Schedule page

Note:
You cannot modify/delete any of the default schedules.
3. Click Add to create a new schedule.
4. Configure the schedule details as listed in the following table.
Type Setting
Schedule The schedule name appears by default. You can type a new
Name schedule name as applicable.
Schedule Type the schedule description.
Description
Advanced schedule settings
C O N F I G U R I N G M A X P R O N V R
Configuring the Schedules
111