Editing The Ports - Honeywell MAXPRO Operator's Manual

Editing the Ports

MAXPRO NVR 3.1 Operator's Guide
5. Click OK. The profile is deleted.
The MAXPRO NVR user interface includes a provision to modify the port number associated
to the following components:
• Trinity Server
• Trinity Controller
• NeoEngine Server
To edit the ports
1. In the Server Settings dialog box, click Edit Ports. The port numbers associated to Server
IP/Name, Controller IP/Name and Storage Engine IP/Name are enabled for editing.
Figure 3-4

Editing the Ports

2. Change the port numbers as applicable.
3. Click Save.
Note:
Port 20000 is used for ONVIF discovery.
L O G G I N G O N A N D F A M I L I A R I Z A T I O N
Logging on Using Profiles
45