Overview - Honeywell MAXPRO Operator's Manual

C O N F I G U R I N G M A X P R O N V R
4

Overview

Overview
The MAXPRO NVR configuration task is performed only by the user having the "NVR
Administrator" role. This is the initial task performed after the setting up the MAXPRO NVR
system.
Note:
MAXPRO NVR configuration involves the following tasks:
68
For a user having the "Operator" role, the contents in this chapter serve as a
reference.
• Configuring the System settings
• Configuring the Disk settings
• Configuring the Cameras
• Adding IP Cameras / Encoders
• Configuring the Advanced Discovery Settings
• Discovering and Adding Third Party PSIA, ONVIF and AXIS Cameras
• Discovering and Adding Multi-channel Encoders
• Adding FLIR Camera
• Adding RTSP Cameras/Encoders
• Configuring the Input and Output for an IP camera
• Configuring 360/180 Cameras
• Managing Analog Cameras
• Configuring Analog Cameras
• Configuring the Input and Output for an Analog camera
• Server VMD (Smart VMD)
• Updating the Cameras
• Deleting the Cameras
• Configuring the Schedules
• Configuring the Sequences
• Performing User administration
MAXPRO NVR 3.1 Operator's Guide