Event And Alarm Types; Camera Level Events And Alarm Types; Recorder Level Events And Alarm Types - Honeywell MAXPRO Operator's Manual

A P P E N D I X B
B

Event and Alarm Types

Event and Alarm Types
This section describes about the various default Event and Alarm types with severity level for
Camera , Recorder and Smart VMD.

Camera Level Events and Alarm types

The following table displays the 17 default camera level Events and Alarm types with
description and severity level.
Note:

Recorder Level Events and Alarm types

The following table displays the 4 default Recorder level Events and Alarm types with
description and severity level.
242
The EventSeverity level above 50 is an alarm and below 50 is an event. See
Setting the Alarm Threshold Value
value.
EventID EventDescription
3 Camera User Recording Started
4 Camera User Recording Completed
5 Camera Disconnected
6 Camera Connected
7 Camera Continuous Recording Disabled
8 Camera Continuous Recording Enabled
9 Camera Event Recording Started
10 Camera Event Recording Completed
11 Camera Disabled
12 Camera Enabled
13 Camera User Recording Error
14 Camera NoMotion Detected
15 Camera Motion Detected
16 Camera Motion Started
17 Camera Motion Stopped
18 Camera Motion Stopped in all regions
139 ExternalInput2
EventID EventDescription
1 Recorder Connected
2 Recorder Disconnected
section to set the Alarm Severity Threshold
EventSeverity
20
20
40
40
20
20
30
30
20
20
30
50
50
70
40
10
40
EventSeverity
70
70
MAXPRO NVR 3.1 Operator's Guide