Honeywell MAXPRO Operator's Manual page 165

MAXPRO NVR 3.1 Operator's Guide
Command
Freeze
Clear on Ack
Receive Alarms Only
Receive Events Only
Receive Both Alarms and Events
M O N I T O R I N G A S I T E
Click to....
stop receiving the new or unacknowledged
alarms in the Alarm window. You can click
this command again to start receiving the
alarms. This feature is useful when the Alarm
window contains many unacknowledged
alarms and it becomes difficult to manage
them. You can stop receiving the alarms
momentarily and start receiving again when
needed.
automatically clear the alarms when they are
acknowledged.
list only the alarms in the Alarm window.
Alarms are listed only when the severity level
of the corresponding event that triggered the
alarm is greater than or equal to the alarm
severity threshold value. See
Preferences section for more information.
list only the events in the Alarm window.
Events whose severity level is greater than or
equal to the alarm severity threshold value
are listed. See Setting Preferences
more information.
to list both alarms and events in the Alarm
window.
Alarms
Setting
section for
165