Honeywell MAXPRO Operator's Manual page 93

MAXPRO NVR 3.1 Operator's Guide
Note:
For Axis M3007-PV and M3027-PVE model cameras, ONVIF should be enabled
on the camera prior to discovery. see Appendix B,
Camera/Encoders Discovery and Configuration (using ONVIF)
4. After the discovery, to add the Axis 360/180 camera models, first clear the check boxes
corresponding to all other cameras other than Axis 360/180 camera model as shown
below.
Note:
Axis 360/180 cameras are listed in the discovery pane with their model numbers
for example Axis M3007 etc.
Figure 4-15 Discovering AXIS 360 Camera
5. In the Advanced Discovery Settings pane, type the User Name and Password of the
Axis 360/180 camera.
Or
By default the username and password configured in the camera is considered.
Note:
The default user name is root and password is pass.
6. Click Apply.
7. In the Discover cameras here area, click Add to add the camera.
C O N F I G U R I N G M A X P R O N V R
Configuring the Cameras
MAXPRO®NVRs - AXIS
section.
93