Updating A User; Deleting A User - Honeywell MAXPRO Operator's Manual

Updating a User

Deleting a User

MAXPRO NVR 3.1 Operator's Guide
13. Click the Camera Event Association tab to associate camera events to the user.
• To associate one particular event, under the Available List, select the check box
corresponding to the event and then click >. The select camera event appears under
the Associated List.
• Click >> to associate all the camera events to the Associated List.
• To remove an event, under Associated List, select a check box corresponding to
the event and then click <. The selected camera event appears under the Available
List.
• Click << to disassociate all the camera events to the Available List.
14. Click Save to save the information.
Note:
You can add a maximum of 1024 users in MAXPRO NVR.
You can modify the settings of a user to change the user ID, password, role, description,
IsWindowsUser flag, and email address. You can update user settings only if you have admin
rights.
Note:
Minimum length of the password is 6 characters. While adding a User, if the
password of other users added before 3.1 release is less than 6 characters then
an error message is displayed and all passwords need to be updated to meet the
minimum requirement.
To update a user
1. Click the Configurator tab. The System page displays by default.
2. Click the User tab to navigate to the User page.
3. Select the check box corresponding to the user you want to modify.
4. Change the settings such as user name, user description, and so on.
5. Click Save.
You can remove a user from MAXPRO NVR. When you delete a user, all the associations
made to the user are also removed.
To delete a user
1. Click the Configurator tab. The System page displays by default.
2. Click the User tab to navigate to the User page.
C O N F I G U R I N G M A X P R O N V R
Performing User Administration
119