Configuring The Additional Configuration Settings Of The Ciu 888 - Honeywell CIU 888 Migration Manual

FIGURE 2-13
2 - 14
Commissioning of a Standalone System Setup
4. Click Yes.
The dialogue box is closed. If the site configuration is successfully
uploaded to the CIU 888, the following dialogue box is displayed
(see FIGURE 2-13).
Successfully Migrated dialogue box
5. Click OK to close the dialogue box.
6. Leave the Ensite Pro to CIU 888 Migration tool open since it will be
needed for updating the INI files.

2.5 Configuring the additional configuration settings of the CIU 888

When the Ensite Pro site configuration has been uploaded to the
CIU 888, the next step is to the configure the additional configuration
settings of the CIU 888.
1. Launch the CIU 888 Web interface, see section 1.4.2.
Ensite Pro to CIU 888 Migration Manual
CIU 888
Part No.: 4417593_Rev09