Configuring Oncam Grandeye Cameras - Honeywell MAXPRO Operator's Manual

C O N F I G U R I N G M A X P R O N V R
4
Configuring the Cameras
Note:
Note:
2.
Note:

Configuring Oncam Grandeye Cameras

The integration of the unique 360-degree Oncam Grandeye H.264 IP cameras in MAXPRO
NVR enables video surveillance, acquisition and tracking that identifies suspicious behavior
enabling the interrogation and verification of a potential threat. This in-turn provides the
necessary intelligence needed to make a measured response to any critical situation.
Grandeye's customized security solutions are designed to address to meet all of today's
security and liability requirements.
MAXPRO NVR supports the following types of Oncam Grandeye H.264 cameras.
The Halocam series cameras support the following views, that help in effective video
surveillance of a site:
The Evolution series cameras support the following views, that help in effective video
surveillance of a site:
90
The default mode is PTZ Mode.
• Select the Lens ID for the camera. The supported lens ids in v3.1 SP1 are AO**V,
A1UST and A8TRT.
By default AO**V Lens ID is selected. For Sony 360 camera the A8TRT lens ID is
selected automatically.
Click Save.
• To view live video from Immervision certified cameras, see
Options from Immervision Enabled Cameras
• The recommended Aspect Ratio for Immervision Certified cameras is 4:3.
• Halocam
• Evolution
• Halocam - HalfPanorama2(OnCam-GE-Hal-HalfPanorama2)
• Halocam - FishEye(OnCam-GE-Hal-FishEye)
• Halocam - VGAFishEyeWithPan(OnCam-GE-Hal-VGAFishEyeWithPan)
• Halocam - Composite1 (OnCam-GE-Hal-Composite1)
• Halocam - Composite2 (OnCam-GE-Hal-Composite2)
• Halocam - VGAFishEye (OnCam-GE-Hal-VGAFishEye)
• Evolution - FishEye(OnCam-GE-Evo-Fisheye)
Video Viewing
section.
MAXPRO NVR 3.1 Operator's Guide