Playing Video From The Loop; To Stop Playing Video; Marking Points Of Interest In The Timeline Using Bookmarks - Honeywell MAXPRO Operator's Manual

Playing Video from the Loop

To Stop Playing Video

Marking Points of Interest in the Timeline using
Bookmarks
MAXPRO NVR 3.1 Operator's Guide
3. To set the end date and time of the loop, add a mark out.
To add a mark out
To add a mark out, click the point in the timeline where you want to add a mark out
and click . Alternatively, you can right-click the point in the timeline where you want
to add a mark out and click Add Mark Out in the context menu. The mark out can
also be added from a panel displaying video. Right-click the panel and click Add
Mark Out in the context menu. The mark out is added at the corresponding date and
time in the timeline.
Note:
You can add multiple mark in and mark out points in the same timeline. However,
you cannot add two mark in points in succession. A mark out point needs to be
added after each mark in point.
To play video from the loop
1. To select the loop, click anywhere between the mark in and mark out points.
Note:
A tool tip appears when you hover the mouse over a loop. The tool tip indicates
the start time and end time of the loop.
2. Click to play the loop. You can also right-click on a loop to display a context menu
and click Play Loop.
To stop playing video
1. In the Timeline window, click to select the loop.
Or
Click the panel displaying video pertaining to the loop. The corresponding timeline is
selected.
2. Click the icon. Alternatively, you can right-click the loop to display a context menu
and click Stop Loop.
You can add bookmarks in a timeline to mark points of interest in a video recording. For
example, if you notice an event in the video and you want to review the portion later, you can
add a bookmark. You can also add comments to the bookmarks and browse from one
bookmark to the other in the timeline. In addition, you can cut and copy a bookmark and
paste it at a different point in the timeline. The bookmark comments appear as tool tips in the
timeline at marked points and are helpful while reviewing recorded video.
M O N I T O R I N G A S I T E
Timeline
139