Honeywell MAXPRO Operator's Manual page 84

C O N F I G U R I N G M A X P R O N V R
4
Configuring the Cameras
4.
5.
Note:
6.
Figure 4-9
7.
Note:
84
Type the required Camera Name.
Type the IP Address of the camera as shown in figure.
The IP address should include the Port number 8081. For example if the IP
address is 111.221.0.333 then you should add the port number (8081) as
111.222.0.333:8081.
Select the required FLIR Series model camera from the Camera Type drop-down list as
shown below (for example FLIR F-Series).
Adding FLIR Model Camera
Scroll right to manually type the User Name and Password.
The default user name is admin and password is admin.
MAXPRO NVR 3.1 Operator's Guide