Basic Function/Copy Function - Fuji Xerox DocuPrint CM225FW User Manual

Basic Function/Copy Function

Type
Memory
Color Capability
Scan Resolution
Print Resolution
Halftone/Printable Colors
Warm-Up Time
Original Paper Size
Output Paper Size
Output Paper Weight
First Copy Output Time
Reduction/Enlargement
Continuous Copy Speed
Paper Tray Capacity
Continuous Copy
Console
512 MB
Full color
Document glass: 600  600 dpi
Automatic document feeder: 600  300 dpi
1200  2400 dpi
256 tones/color (16.7 million colors)
35 seconds or less (at 22°C room temperature)
IMPORTANT:
• It may take longer due to the image quality adjustment.
Document glass:
The maximum size is 215.9  297 mm for both sheets and books.
Automatic document feeder:
The maximum size is 215.9  355.6 mm.
Maximum: Legal
Minimum: 76.2  127 mm (3  5")
Image loss width: Top edge, 4 mm or less; bottom edge, 4 mm or less; left and
right edges, 4 mm or less
60 – 163 gsm
IMPORTANT:
• Use paper recommended by Fuji Xerox. Copying may not be performed
correctly depending on the conditions.
Monochrome: 20.0 seconds (for A4
Color: 30.0 seconds (for A4
IMPORTANT:
• The values may vary depending on the machine configuration.
±
Size-for-Size: 1:1 1.3%
Preset %: 50%, 70%, 81%, 100%, 122%, 141%, 200%
Variable %: 25 – 400% (1% increments)
Document glass:
Monochrome: 18 sheets/minute
Color: 18 sheets/minute
Automatic document feeder:
Monochrome: 18 sheets/minute
Color: 8 sheets/minute
IMPORTANT:
• Print speed may decrease due to factors such as paper type, paper size, and
printing conditions.
• When continuously printing a single document of A4
Standard: 150 sheets (Standard 150 sheet tray)
Maximum paper capacity: 150 sheets (standard)
IMPORTANT:
• When using Fuji Xerox P paper (64 gsm)
99 images
NOTE:
• The machine may pause temporarily to perform image stabilization.
/monochrome mode)
/color mode)
Specifications
.
17