Color Registration Is Out Of Alignment - Fuji Xerox DocuPrint CM225FW User Manual

 Color Registration Is Out of Alignment
Problem

Color registration is out of alignment.

NOTE:
• If the problem continues even though you have taken suggested actions described above, contact the Fuji Xerox local
representative office or an authorized dealer.
Action
Execute an auto color registration adjustment.
1 Launch the Printer Setting Utility, and click Registration Adjustment on the
Printer Maintenance tab.
2 Deselect the check box next to On.
3 Click Start next to Auto Correct.
Clean the CTD sensor.
1 Clean the CTD sensor.
2 Launch the Printer Setting Utility, and click Registration Adjustment on the
Printer Maintenance tab.
3 Deselect the check box next to On.
4 Click Start next to Auto Correct.
See also:
• "Cleaning the Color Toner Density (CTD) Sensor" on page 323
Print the color registration chart and manually correct the color registration.
1 Launch the Printer Setting Utility, and click Registration Adjustment on the
Printer Maintenance tab.
2 Deselect the check box next to On.
3 Click Start next to Print Color Regi Chart.
The color registration chart is printed.
4 Check the values with the straight lines on the chart.
5 Select the value for each color on the Printer Setting Utility.
6 Click Apply New Settings.
7 Click Start next to Print Color Regi Chart to print the color registration chart
again.
8 Adjust until all straight lines are at the value of 0.
See also:
• "Adjusting Color Registration" on page 291
Troubleshooting 287