Connection Speed - Fuji Xerox DocuPrint CM225FW User Manual

IPsec
NOTE:
• IPsec feature is available only when IPsec is enabled on the CentreWare Internet Services.
Purpose:
Disables IPsec.
Value:
Disable
Reset Wireless
NOTE:
• Reset Wireless feature is available only when the printer is connected using the wireless network.
Purpose:
To reset the wireless connection settings. After executing this function, all information about the access point is
cleared.
Value:
Reset

Connection Speed

NOTE:
• Connection Speed feature is available only when the printer is connected using the wired network.
Purpose:
To specify the communication speed and the duplex settings of Ethernet. The change becomes effective after the
printer is turned off and then on again.
Values:
Auto*
10Base-T Half
10Base-T Full
100Base-T Half
100Base-T Full
• Wi-Fi Direct
Purpose:
To configure the Wi-Fi Direct
Values:
Wi-Fi Disable*
Direct
Enable
Connection No Entry
Status
Displays the
connected device
name and current
role.
Displays the printer name.
Device Name
Specify a name to identify the wireless network.
SSID
Passphrase Print
Passphrase
Reset
Passphrase
218 Using the Operator Panel Menus and Keypad
Disables IPsec.
Resets the wireless connection settings.
Detects the Ethernet settings automatically.
Uses 10Base-T Half-duplex.
Uses 10Base-T Full-duplex.
Uses 100Base-T Half-duplex.
Uses 100Base-TX Full-duplex.
®
settings.
Disables the Wi-Fi Direct connection.
Enables the Wi-Fi Direct connection.
Indicates that no device is available.
Disconnect
now
Disconnect
and Reset
Passphrase
Prints the passphrase. Confirm it when you enter the passphrase to your mobile
device.
Resets the passphrase.
Disconnect the connected device when using Wi-Fi Direct.
Disconnect the connected device and reset passphrase when
using Wi-Fi Direct.