Haier HDW9-TFE3WH Instructions For Use Manual

Haier HDW9-TFE3WH Instructions For Use Manual

Tfe3 series
Hide thumbs Also See for HDW9-TFE3WH:


TFE3 Series
Instructions for Use
3 in 1


Table of Contents

Subscribe to Our Youtube Channel

Summary of Contents for Haier HDW9-TFE3WH

  • Page 1 Dishwasher TFE3 Series Instructions for Use HEAVY POWER 3 in 1 DELAY NORMAL LIGHT GLASSWARE QUICK 30 RINSE PRE-RINSE HDW9-TFE3WH HDW9-TFE3SS...
  • Page 2: Table Of Contents

    Index Safety information Installation Getting to know your appliance How to fill the rinse aid container How to fill the detergent dispenser Non-Dishwasher Items Arranging crockery, glasses, etc. in the dishwasher Programme overview Washing dishes Care & Maintenance Trouble shooting Technical data Important information Disposal...
  • Page 3: Safety Information

    Safety information At time of delivery Check packaging and dishwasher immediately for signs of transport damage. If the appliance is damaged, do not use it and contact the retailer or our approved customer service department without delay. Please dispose of packaging materials properly. During installation Unpack the dishwasher and connect in accordance with the installation instructions.
  • Page 4: If A Fault Occurs

    If your family includes children or the infirm The appliance is not intended for use by young children or infirm persons without supervision. Keep detergents out of the reach of children. If a fault occurs If the appliance malfunctions, turn off the water supply to the appliance, switch it off and disconnect the plug from the wall socket.
  • Page 5: Installation

    Connections and services Check that the power cord is long enough to reach the outlet. If it isn’t, it must be replaced by a Haier authorised technician. Extension cords or multi-outlet power boards should not be used to connect the dishwasher to the power supply.
  • Page 6 Product and cabinetry dimensions Product dimensions (mm) overall height of product with top panel in place 850 (min) -870 (max)** with top panel removed* 820 (min) -840 (max)** overall width of product overall depth of product depth of open door (measured from front of kickstrip) Cabinetry dimensions (mm)
  • Page 7 Preparing the product and cabinetry The top panel may be removed to suit underbench cavity height. See the illustrations below. Important! To prevent possible steam damage to the cabinetry, ensure that any bare wood surrounding the dishwasher is sealed with an oil-based paint or moisture-proof polyurethane. Services can be located either side of the dishwasher.
  • Page 8 Levelling and positioning the dishwasher Before sliding the dishwasher into position, adjust the feet with a spanner (1) to ensure that the dishwasher is level (2) and the required height. Do not lift the dishwasher from the door handle or top panel. Position the dishwasher in the cavity, ensuring that the hoses and power cord don’t get bent, crimped, or trapped under the dishwasher in the process (3).
  • Page 9 Plumbing -- Waste connection These drainage options are designed to eliminate problems that occur with combined sink-dishwasher waste systems. Drainage option A: Separate sink and dishwasher waste systems The standpipe must have a minimum diameter of 38 mm and stand 750 mm above the floor. Use the supplied drain hose support to hold the drain hose in place in the standpipe.
  • Page 10 Plumbing -- Water inlet connection Important! The appliance should be connected to the water main using the new water inlet hose supplied. Old hoses should not be used. Do not shorten the inlet hose. Take note of water connection requirements. The dishwasher has a single valve water connection.
  • Page 11: Electrical Connection

    This should only be done by a Haier authorised technician. Do not modify or cut the plug. Do not use an adaptor, extension cord, or multi-outlet power board to connect the dishwasher to the power supply, as these could cause overheating and create a fire hazard.
  • Page 12: Getting To Know Your Appliance

    Getting to know your appliance Close-up view (control panel) HEAVY POWER 3 in 1 DELAY NORMAL LIGHT GLASSWARE QUICK 30 RINSE PRE-RINSE Delayed Start Button ON-OFF Indicator Time-remaining Indicator ON-OFF Button "3 in 1" Indicator Low Rinse Aid Indicator "3 in 1" Button Heater Indicator Delayed Start Indicator Programme Selection Dial...
  • Page 13: How To Fill The Rinse Aid Container

    How to fill the rinse aid container Rinse aid This product makes dishes sparkle and helps them to dry without spotting. The dispenser is located on the inside panel of the door. When the low rinse aid indicator lights up on the control panel (see Fig.A), Fig.A you must add rinse aid.
  • Page 14: How To Fill The Detergent Dispenser

    How to fill the detergent dispenser Detergent Detergent specifically intended for use with dishwashers must be used. The dispenser must be refilled before the start of each wash cycle following the instructions provided in the "Programme overview". The detergent dispenser is located on the inside panel of the door.
  • Page 15: Non-Dishwasher Items

    Non-Dishwasher Items What you should not put into the dishwasher Cutlery and tableware manufactured in whole or part from wood. These will become faded and deteriorate quickly. Furthermore, the adhesives that are used are not suitable for the temperature inside the dishwasher. Delicate decorative glassware and vases, special antique or irreplaceable china.
  • Page 16 Loading the Dishwasher Before placing the dishes in the dishwasher, remove the larger food scraps to prevent the filter from becoming clogged.If the pots and pans have baked-on food that is extremely hard to remove,we recommend they are soaked before washing. This will eliminate the need for extra wash cycles. Pull out the rack to load the dishwasher.
  • Page 17: Programme Overview

    Programme overview Detergent Rinse Wash Description of cycle Types of load Extended programme Prewash Wash Very dirty dishes, Pre-wash with hot water. Extended wash at 68°C. pots and pans. (Not HEAVY Rinses with cold water. to be used with deli- Rinse with hot water.
  • Page 18: Washing Dishes

    Washing dishes Programme selection The most appropriate programme can be identified by comparing the type of crockery, cutlery, etc., and the amount and condition of food residue, with the details contained in the programme overview. The corresponding programme sequence, duration and consumption details are shown in the right half of the overview.
  • Page 19: End Of Programme

    End of programme Six beeps will indicate that the wash cycle has finished and the indicator light "A" comes on. Switching the dishwasher OFF Several minutes after the programme has ended: Set On-Off button to Off. Open the door. Remove dishes, etc. when they have cooled down. Notice: If the programme is already underway press the ON-OFF button "B"...
  • Page 20: In 1 Function

    After 3 seconds the delayed start indicator "E" blinks. The time-remaining indicator "G" will also blink. The programme will start when both lights fade. Cancelling or modifying a cycle A cycle that is underway can be modified if it has only been running for a short time. Otherwise, the detergent may have already been used and the appliance may have already drained the wash water.
  • Page 21: Care & Maintenance

    Care & Maintenance After every wash After every wash leave the door slightly ajar so that moisture and odours are not trapped inside. Remove the plug Before cleaning or performing maintenance, always switch off the machine and remove the plug from the socket.
  • Page 22: Overall Condition Of Appliance

    Care and maintenance Regular inspection and maintenance of your appliance helps to prevent problems from occurring. This saves time and aggravation. You should therefore carefully inspect the inside of your dishwasher from time to time. Overall condition of appliance Check that no grease or scale has accumulated on the inside of the dishwasher. If you discover any deposits: Clean the interior of the dishwasher thoroughly with a dishwasher detergent solution.
  • Page 23: Spray Arms

    Spray arms Lime scale and food residue in the wash water can block the nozzles in the spray arms "10" and "11" and the arm mountings (see Figs. J and K). Inspect the nozzles in the spray arms for holes blocked due to food residue.
  • Page 24: Trouble Shooting

    Trouble shooting Resolving minor problems yourself Experience has shown that you can resolve most problems that arise during normal daily usage yourself without having to call out a service engineer. Not only does this save costs, but it also means that the appliance is available for use again that much sooner.
  • Page 25 When the buzzer emits 10 short warning signals every 30 seconds and the time-remaining indicator displays"E4" Have you checked whether: POWER 3 in 1 DELAY The drain hose is creased or kinked. The drain hose is too high. When the buzzer emits 10 short warning signals every 30 seconds and the time-remaining indicator displays"E5"...
  • Page 26 Water remains inside appliance after programme has ended. Blockage or kink in drainage hose. Pump is jammed. Filters are blocked. The programme is still running. Wait for the programme to end..during washing Unusual amount of foam is created Normal washing up liquid has been poured into the rinse-aid container. Remove any spilled rinse aid with a cloth as it could otherwise lead to excessive foaming during the next washing cycle.
  • Page 27 Plastic items are discoloured Not enough detergent was added to dispenser. Detergent has insufficient bleaching properties. Use a detergent containing a chemical bleaching agent. White stains are left on crockery, glasses have a milky appearance Not enough detergent was added to dispenser compartment. Amount of rinse-aid was set too low.
  • Page 28: Technical Data

    Technical data Width 450 mm 600 mm Depth Height 850 mm 9 standard place settings Capacity Mains water pressure 0.03-1.0MPa Power voltage 220-240V~ 50Hz Maximum current intensity Total absorbed power 1950W Important information Notes on waste disposal Old appliances still have some residual value. An environment-friendly method of disposal will ensure that valuable raw materials can be recovered and used again.

This manual is also suitable for:


Table of Contents