Table of Contents
Advertisement
STEP 11 - LEVEL THE DISHWASHER
IMPORTANT: Dishwasher must be level for proper dish rack operation and wash
performance.
1. Align front of dishwasher door panel with cabinet doors. You may need to adjust
alignment to be even with your cabinets.
NOTE: Prop up one side of frame to hold dishwasher up off floor when adjusting
front legs. With some installations, it may be easier to adjust the front leg using a
6" adjustable wrench.
2. Check that the leveling legs are firmly against the door.
3. Close and latch the door, and place level against the front panel. Check that
dishwasher is plumb. If needed, adjust leveling leg or add shims until dishwasher
is plumb.
NOTE: Shims must be securely attached to floor to prevent their movement
when the dishwasher is operated.
4. Repeat for other side of dishwasher.
5. Place level on door and rack track inside the tub as shown. Check that
dishwasher is level from side to side, and from back to front. If the dishwasher is
not level, adjust front legs up or down until dishwasher is level.
a
NOTE: Pull lower rack out about halfway. If the rack rolls forward or back into the
dishwasher, the dishwasher must be leveled again.
22
a
Level Front to Back
b
Level Side to Side
b
Advertisement
Table of Contents
