Precor P80 Service Manual page 84

15 A screen will appear stating that the equipment is ready to be set up, touch USER NAME AND
PASSWORD.
16 The user name and password will have been provided by Precor prior to installation. Enter the user
name using the on-screen keypad, then touch NEXT.
17 Enter the password using the on-screen keypad, then touch NEXT.
18 The next screen will list information that you need to know before continuing with the registration
process.
•
Site Code – This is given at the time of the dispatch.
•
Base Serial Number – The base serial number is located on the exercise equipment.
• Friendly Name - It is recommended that you have a list of the equipment with friendly names
already assigned, such as Elliptical 1, Treadmill 22, and so forth. Touch NEXT.
19 Enter the Site Code using the on-screen keypad, then touch NEXT.
20 Enter the Base Serial Number using the on-screen keypad, then touch NEXT.
21 Enter the Friendly Name using the on-screen keypad, then touch NEXT.
22 The next screen displayed will be the Registration Summary screen. Review the screen to ensure the
information entered is correct before completing the registration. If the information is not correct

touch BACK until the screen with incorrect information is displayed. Make the corrections and
then touch NEXT unit you are back at the Registration Summary Screen.
23 Touch Register to submit the data.
24 If the registration was successful a screen with current software version will be displayed. Touch
FINISH to the Systems Settings menu, if a newer software version is available, the console will
automatically start the download.

25 Touch BACK to Exit.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 82